Custom 1998-2000 LEXUS GS S160 PILLARS

Lexus GS Alcantara Pillar Set (A/B/C) — 1998–2000

Refresh your S160-chassis Lexus GS interior with OEM-fit pillar trims wrapped to order in Alcantara (or your choice of premium materials). This set covers A, B, and C pillars for left and right sides on 1998–2000 GS300/GS400, built as direct replacements and custom-made to your finish/spec.

Part Numbers

A-Pillar (Front Pillar Garnish)
Right (RH): 62211-30400-xx — color suffixes vary by interior (e.g., A0 Ivory) source.
Left (LH): 62212-30410-xx — color suffixes vary (e.g., A0 Ivory) source.

B-Pillar (Center Pillar Garnish)
Upper RH: 62411-30330-xx (center pillar trim; suffix by color) source.
Upper LH: 62412-30452-xx (supersession family for upper LH; suffix by color) source.
Lower RH (panel sub-assy): 62041-30090-G0 (Li. Spruce); superseded variants exist source alt.
Lower LH: 62414-30141-xx (suffix by color; common Ivory/Gray/Black suffixes A0/B0/C0) source alt.

C-Pillar (Rear Seat Side / C-Pillar Trim)
Right (RH): 62551-30271-xx (e.g., C0 Black, A1 Ivory) source alt.
Left (LH): 62552-30260-xx (e.g., B0 Gray, C0 Black) source alt.

Notes: Part numbers carry color suffixes (e.g., A0 Ivory, B0 Gray, C0 Black, G0 Spruce). Availability and supersessions vary by interior color, airbags/SRS options, and production date. Always confirm via VIN when you order raw cores or clips.

Compatibility with other chassis'

These pillar trim families are for the S160 Lexus GS (1998–2000 GS300/GS400; many supersessions list through 2001–2005 GS300/GS430). C-pillar part families 62551-30271-xx and 62552-30260-xx are cataloged across GS300/GS430 in the same generation source source. B-pillar and A-pillar numbers listed above also appear in dealer catalogs that span nearby model years within the S160 range; confirm color and SRS configuration per VIN before ordering source source source.

Custom Alcantara, Forged Carbon Fiber, Carbon Fiber, Nappa Leather

We build these as OEM+ direct swaps: you send OEM cores or we source them, then we re-trim with your choice of Alcantara, forged carbon skin, traditional carbon fiber, or premium Nappa leather. Fitment matches factory mounting points and clips. Our process preserves airbag/SRS clearance where applicable and maintains OE geometry.

Installation tools needed

• Plastic trim removal tools (to protect soft trim)
• Small flat & Phillips screwdrivers
• 10mm socket/ratchet (for any hidden fasteners)
• Torx set (when applicable)
• Needle-nose pliers (for clip extraction)
• Replacement pillar clips as needed (e.g., front pillar clip 62217-33031) source
• Microfiber towels & isopropyl alcohol (wipe mating surfaces)

OEM+ parts, Direct swap of OEM parts

These are OEM-geometry parts trimmed to your spec. We prioritize factory fit with OE clip locations and edges. Send us your VIN for color-code verification and any mid-year supersession checks before we begin your custom build.