Custom 2001-2005 LEXUS IS XE10 HEADLINER

Lexus IS300 Alcantara Headliner & Sunroof Cover — 2002-2005 XE10

Transform the roof of your Lexus IS300 (XE10, 2002-2005) with a custom OEM-geometry headliner and sunroof shade / cover. Crafted in premium materials—Alcantara, Nappa leather, carbon fiber—these are direct replacements that preserve factory mounting, light and sunroof cut-outs, and interior finish continuity.

Part Numbers

Note: Verified OEM numbers for XE10 2002-2005 headliner & sunroof cover are scarce. Most published numbers are for newer IS generations. Always confirm via your VIN, interior color code, and whether the vehicle is equipped with a sunroof.

Sunroof Shade / Sunroof Cover
Possible later IS300/IS model number: 63306-53060-B1 (roof sunshade / cover, lt-gray) source.
Another possible variant: 63306-53060-C1 (black) source.

Headliner / Roof Headlining & Silencer Pad
No confirmed OEM part number found specific to 2002-2005 IS300 XE10 with sunroof. Common published part numbers (later gen) include 63311-53311-B0 / 63311-53311-C0 etc., but sources show these apply to newer models.
Always verify color, headliner style (with or without sunroof), and any cut-outs (dome light, sunroof track) via VIN and interior code.

Compatibility & Fitment Notes

• Only fits IS300 XE10 sedan with matching roof style (sunroof vs no sunroof). The shape, track cut-out, and roof side mouldings vary depending on sunroof presence.
• Interior color code is crucial. Trim colors like ivory, gray, black etc. determine matching headliner material and shade.
• Heads up: later IS generations (post-2005) use different headliner geometry, so headliners from those will not drop in perfectly.

Custom Alcantara, Forged Carbon Fiber, Carbon Fiber, Nappa Leather

Your headliner and sunroof cover are built OEM+ quality. We can re-fabricate core panels or use your existing ones, then cover in Alcantara, carbon skins, or premium leather. We retain all factory cut-outs (sunroof, lights), ensure correct material thickness, and match interior trim and fabric texture or stitch detail.

Installation tools needed

• Trim removal tools (plastic / soft plastic) to remove pilasters, trim near roof edges without damage
• Phillips & flat screwdrivers for dome light, assist grips, visors, etc.
• Socket set (metric), likely small sizes for headliner bolts or screws
• Torx drivers (if any components use them)
• Needle-nose pliers for clips
• Clean lint-free cloths & isopropyl alcohol for prep
• Adhesive or foam backing materials (if re-fabricating headliner core)

OEM+ parts, Direct swap of OEM parts

These headliners & covers are direct OEM replacement design, built to factory dimensions, mounting points, and cut-outs. They swap in using your existing hardware, without modifying headliner bows or roof frame structure. Provide your VIN and interior situation (sunroof / no sunroof) so the proper core and finish match your build.