2001 LEXUS IS XE10 OVERHEAD BUNDLE

Lexus IS300 Alcantara Sunvisors & Pillars

Refresh the entire upper cabin of your 2001 Lexus IS300 with custom-wrapped OEM sunvisors and A/B/C pillar trims. We start from original Lexus cores for perfect fitment, then re-wrap them in premium materials for a modern, motorsport-inspired look.

Part Numbers

• Sunvisors (medium charcoal/black): LH 74320-53111-B0 (replaces 74320-53110-B0), RH 74310-53111-B0.
• A-pillars (front, medium charcoal): LH 62212-53021-B0 / 62212-53022-B0, RH 62211-53021-B0.
• B-pillars (center, lower, black): LH 62414-53010-C0, RH 62413-53010-C0.
• C-pillars (rear): LH 62472-53010, RH 62471-53010.

OEM references sourced from Lexus parts catalogs and specialist suppliers, including visor assemblies and pillar garnish listings for the IS300 platform.

74320-53111-B0 reference | visor set 01–05 IS300 | 62413-53010-C0 (black B-pillar) | C-pillar 62471-53010 / 62472-53010 | 62212-53021-B0 front pillar

Compatibility with other chassis'

These part numbers are listed for 2001–2005 Lexus IS300 sedans and SportCross models, so your custom-wrapped set works across the full XE10 IS300 range when matched to the correct interior color (black/medium charcoal prioritized). The A-pillar trims (62212-53021-B0 / 62212-53022-B0) also cross-reference to JDM Toyota Altezza/Altezza Gita models in the same medium-charcoal trim family, making those vehicles valid OEM core donors when needed.

Custom Alcantara, Forged Carbon Fiber, Carbon Fiber, Nappa Leather

Each BaesicBuilds.com set is built on OEM Lexus cores for true plug-and-play replacement. We strip, prep, and recover the visors and pillar trims in your choice of Alcantara, forged carbon fiber, traditional carbon fiber, or Nappa leather. Factory mounting points, clips, airbag clearances, grab-handle locations, and visor wiring are all retained, giving you an OEM+ finish with show-car materials.

Installation tools needed

• Plastic trim removal tools
• Phillips screwdriver and 10 mm socket/ratchet
• Panel clip pliers (for stubborn clips)
• Torque wrench for seat belt/B-pillar anchor hardware

OEM+ parts, Direct swap of OEM parts

Because we start from real Lexus IS300/Altezza cores that match the OEM part numbers above, installation is a direct swap: unclip the old visors and pillar trims, transfer any hardware if required, and reinstall. No cutting, drilling, or universal brackets—just factory geometry with upgraded materials for a seamless OEM+ interior upgrade.