2006-2013 BMW 3-SERIES E90 WOOD TRIM NON-M NON-IDRIVE

BMW 3-Series (E90) Alcantara Wood Trim (Non-iDrive, Non-M)

Custom-made, OEM+ interior trim set for the 2006–2013 BMW 3-Series E90 sedan (non-iDrive, non-M). Built as a direct replacement for factory fine-wood trims; each piece is crafted to order and wrapped to your spec for a seamless OEM fit and finish.

Part Numbers

• Center Console Trim (non-iDrive), Aluminum finish — 51169145147 (source).
• Center Console Trim (non-iDrive), Burr Walnut — 51167129547 (source).
• Dashboard Vent/Trim – Left, Walnut Root (typical LCI fitment) — 51456985538 (source, alt source). 
• Dashboard Decorative Strip – Left (earlier supersession seen in market) — 51456970074 (market listing with PN).

Notes: BMW used multiple trim finishes (Burr Walnut S4ABA, Poplar, Aluminum, etc.) and updated numbers across pre-LCI/LCI. Exact PNs vary by production date, finish, and LHD/RHD. For absolute accuracy, confirm by VIN on the BMW parts catalog. RealOEM VIN lookup.

Compatibility with other chassis'

• The non-iDrive center console trims above are listed specifically for E90 (sedan). Similar non-iDrive console trims exist for E91/E92/E93 but use different PNs; do not mix across chassis without VIN verification. (reference fitment page).
• Dashboard side trims share design language across E90/E91 and are frequently sold with E90/E91 labeling; some sellers list cross-fit to E92/E93 for certain finishes (verify by PN/VIN). (ECS listing, seller cross-fit example).

Custom Alcantara, Forged Carbon Fiber, Carbon Fiber, Nappa Leather

We upholster your OEM cores (or our exchange cores) in premium Alcantara, Nappa leather, or produce forged/carbon fiber skins. All pieces are built to order, color-matched, and trimmed for factory clip-in locations. This preserves OEM tolerances and avoids rattles—true direct replacements that install like stock.

Installation tools needed

• Plastic trim removal tools (non-marring)
• T20 Torx driver (common for vent/console screws)
• Small flathead for clip tabs (use gently)
• Isopropyl alcohol & microfiber (prep surfaces)
• Flashlight and magnetic pickup (help with hidden screws/clips)

OEM+ parts, Direct swap of OEM parts

These pieces retain the OEM mounting points and install as a direct swap. No coding, no adapters—just pop off the old trim, transfer vents/clips where required, and snap in the new set. For best results, verify your VIN to confirm the exact PN supersessions and finish mapping before ordering (BMW catalog; ECS fitment).